• Crystal Reports Version 11
• Crystal Report Versions

SAP Crystal Reports, developer version for Microsoft Visual Studio — Please go. Crystal Reports, version for Eclipse — Please go here; SAP Crystal Reports. There is no Crystal designer version available on 2009 & 2010. After CR 2008 the next latest Crystal Designer version is Crystal reports 2011. Its version number is 14.0.0.760. Thanks, Naga. Crystal Decisions was acquired in December 2003 by BusinessObjects, which produced versions 10, 11 (XI) and version 12 (2008). SAP acquired BusinessObjects on October 8, 2007 and released Crystal Reports 2011 (version 14) on May 3, 2011.

Crystaldecisions.crystalreports.engine.dll Explanationlink

The Crystaldecisions.crystalreports.engine.dll file is 0.41 MB. The download links are current and no negative feedback has been received by users. It has been downloaded 14406 times since release and it has received 4.3 out of 5 stars.

Table of Contents

• Methods to Solve the Crystaldecisions.crystalreports.engine.dll Errors
  • Method 5: Solving the Crystaldecisions.crystalreports.engine.dll Error by Updating Windows

Operating Systems That Can Use the Crystaldecisions.crystalreports.engine.dll Filelink

Other Versions of the Crystaldecisions.crystalreports.engine.dll Filelink

The latest version of the Crystaldecisions.crystalreports.engine.dll file is 9.1.9360.0 version released for use on 2012-07-31. Before this, there were 1 versions released. All versions released up till now are listed below from newest to oldest

1. 9.1.9360.0 - 32 Bit (x86) (2012-07-31) Download directly this version now
2. 9.1.9360.0 - 32 Bit (x86)Download directly this version now

Guide to Download Crystaldecisions.crystalreports.engine.dlllink

1. First, click on the green-colored 'Download' button in the top left section of this page (The button that is marked in the picture).
2. After clicking the 'Download' button at the top of the page, the 'Downloading' page will open up and the download process will begin. Definitely do not close this page until the download begins. Our site will connect you to the closest DLL Downloader.com download server in order to offer you the fastest downloading performance. Connecting you to the server can take a few seconds.

Methods to Solve the Crystaldecisions.crystalreports.engine.dll Errorslink

ATTENTION! Before starting the installation, the Crystaldecisions.crystalreports.engine.dll file needs to be downloaded. If you have not downloaded it, download the file before continuing with the installation steps. If you don't know how to download it, you can immediately browse the dll download guide above.

Method 1: Installing the Crystaldecisions.crystalreports.engine.dll File to the Windows System Folderlink

1. The file you are going to download is a compressed file with the '.zip' extension. You cannot directly install the '.zip' file. First, you need to extract the dll file from inside it. So, double-click the file with the '.zip' extension that you downloaded and open the file.
2. You will see the file named 'Crystaldecisions.crystalreports.engine.dll' in the window that opens up. This is the file we are going to install. Click the file once with the left mouse button. By doing this you will have chosen the file.
3. Click the 'Extract To' symbol marked in the picture. To extract the dll file, it will want you to choose the desired location. Choose the 'Desktop' location and click 'OK' to extract the file to the desktop. In order to do this, you need to use the Winrar software. If you do not have this software, you can find and download it through a quick search on the Internet.
4. Copy the 'Crystaldecisions.crystalreports.engine.dll' file and paste it into the 'C:WindowsSystem32' folder.
5. If your system is 64 Bit, copy the 'Crystaldecisions.crystalreports.engine.dll' file and paste it into 'C:WindowssysWOW64' folder.

   NOTE! On 64 Bit systems, you must copy the dll file to both the 'sysWOW64' and 'System32' folders. In other words, both folders need the 'Crystaldecisions.crystalreports.engine.dll' file.

6. In order to complete this step, you must run the Command Prompt as administrator. In order to do this, all you have to do is follow the steps below.

   NOTE! We ran the Command Prompt using Windows 10. If you are using Windows 8.1, Windows 8, Windows 7, Windows Vista or Windows XP, you can use the same method to run the Command Prompt as administrator.

   1. Open the Start Menu and before clicking anywhere, type 'cmd' on your keyboard. This process will enable you to run a search through the Start Menu. We also typed in 'cmd' to bring up the Command Prompt.
   2. Right-click the 'Command Prompt' search result that comes up and click the Run as administrator' option.
7. Paste the command below into the Command Line that will open up and hit Enter. This command will delete the damaged registry of the Crystaldecisions.crystalreports.engine.dll file (It will not delete the file we pasted into the System32 folder; it will delete the registry in Regedit. The file we pasted into the System32 folder will not be damaged).

   %windir%System32regsvr32.exe /u Crystaldecisions.crystalreports.engine.dll

8. If you are using a Windows version that has 64 Bit architecture, after running the above command, you need to run the command below. With this command, we will clean the problematic Crystaldecisions.crystalreports.engine.dll registry for 64 Bit(The cleaning process only involves the registries in Regedit. In other words, the dll file you pasted into the SysWoW64 will not be damaged).

   %windir%SysWoW64regsvr32.exe /u Crystaldecisions.crystalreports.engine.dll

9. We need to make a clean registry for the dll file's registry that we deleted from Regedit (Windows Registry Editor). In order to accomplish this, copy and paste the command below into the Command Line and press Enter key.

   %windir%System32regsvr32.exe /i Crystaldecisions.crystalreports.engine.dll

10. If you are using a 64 Bit operating system, after running the command above, you also need to run the command below. With this command, we will have added a new file in place of the damaged Crystaldecisions.crystalreports.engine.dll file that we deleted.

    %windir%SysWoW64regsvr32.exe /i Crystaldecisions.crystalreports.engine.dll

11. If you did the processes in full, the installation should have finished successfully. If you received an error from the command line, you don't need to be anxious. Even if the Crystaldecisions.crystalreports.engine.dll file was installed successfully, you can still receive error messages like these due to some incompatibilities. In order to test whether your dll problem was solved or not, try running the software giving the error message again. If the error is continuing, try the 2nd Method to solve this problem.

Method 2: Copying The Crystaldecisions.crystalreports.engine.dll File Into The Software File Folderlink

1. First, you must find the installation folder of the software (the software giving the dll error) you are going to install the dll file to. In order to find this folder, 'Right-Click > Properties' on the software's shortcut.
2. Open the software file folder by clicking the Open File Location button in the 'Properties' window that comes up.
3. Copy the Crystaldecisions.crystalreports.engine.dll file into the folder we opened.
4. The installation is complete. Run the software that is giving you the error. If the error is continuing, you may benefit from trying the 3rd Method as an alternative.

Method 3: Doing a Clean Reinstall of the Software That Is Giving the Crystaldecisions.crystalreports.engine.dll Errorlink

1. Push the 'Windows' + 'R' keys at the same time to open the Run window. Type the command below into the Run window that opens up and hit Enter. This process will open the 'Programs and Features' window.

   appwiz.cpl

2. The Programs and Features screen will come up. You can see all the softwares installed on your computer in the list on this screen. Find the software giving you the dll error in the list and right-click it. Click the 'Uninstall' item in the right-click menu that appears and begin the uninstall process.
3. A window will open up asking whether to confirm or deny the uninstall process for the software. Confirm the process and wait for the uninstall process to finish. Restart your computer after the software has been uninstalled from your computer.
4. 4. After restarting your computer, reinstall the software that was giving you the error.
5. You can solve the error you are expericing with this method. If the dll error is continuing in spite of the solution methods you are using, the source of the problem is the Windows operating system. In order to solve dll errors in Windows you will need to complete the 4th Method and the 5th Method in the list.

Method 4: Solving the Crystaldecisions.crystalreports.engine.dll Error using the Windows System File Checker (sfc /scannow)link

1. In order to complete this step, you must run the Command Prompt as administrator. In order to do this, all you have to do is follow the steps below.

   NOTE! We ran the Command Prompt using Windows 10. If you are using Windows 8.1, Windows 8, Windows 7, Windows Vista or Windows XP, you can use the same method to run the Command Prompt as administrator.

   1. Open the Start Menu and before clicking anywhere, type 'cmd' on your keyboard. This process will enable you to run a search through the Start Menu. We also typed in 'cmd' to bring up the Command Prompt.
   2. Right-click the 'Command Prompt' search result that comes up and click the Run as administrator' option.
2. Paste the command in the line below into the Command Line that opens up and press Enter key.

   sfc /scannow

3. The scan and repair process can take some time depending on your hardware and amount of system errors. Wait for the process to complete. After the repair process finishes, try running the software that is giving you're the error.

Method 5: Solving the Crystaldecisions.crystalreports.engine.dll Error by Updating Windowslink

Some softwares need updated dll files. When your operating system is not updated, it cannot fulfill this need. In some situations, updating your operating system can solve the dll errors you are experiencing.

In order to check the update status of your operating system and, if available, to install the latest update packs, we need to begin this process manually.

Depending on which Windows version you use, manual update processes are different. Because of this, we have prepared a special article for each Windows version. You can get our articles relating to the manual update of the Windows version you use from the links below.

Crystal Reports Version 11

Explanations on Updating Windows Manuallylink

Common Crystaldecisions.crystalreports.engine.dll Errorslink

If the Crystaldecisions.crystalreports.engine.dll file is missing or the software using this file has not been installed correctly, you can get errors related to the Crystaldecisions.crystalreports.engine.dll file. Dll files being missing can sometimes cause basic Windows softwares to also give errors. You can even receive an error when Windows is loading. You can find the error messages that are caused by the Crystaldecisions.crystalreports.engine.dll file.

If you don't know how to install the Crystaldecisions.crystalreports.engine.dll file you will download from our site, you can browse the methods above. Above we explained all the processes you can do to solve the dll error you are receiving. If the error is continuing after you have completed all these methods, please use the comment form at the bottom of the page to contact us. Our editor will respond to your comment shortly.

1. 'Crystaldecisions.crystalreports.engine.dll not found.' error
2. 'The file Crystaldecisions.crystalreports.engine.dll is missing.' error
3. 'Crystaldecisions.crystalreports.engine.dll access violation.' error
4. 'Cannot register Crystaldecisions.crystalreports.engine.dll.' error
5. 'Cannot find Crystaldecisions.crystalreports.engine.dll.' error
6. 'This application failed to start because Crystaldecisions.crystalreports.engine.dll was not found. Re-installing the application may fix this problem.' error

Other Dll Files Used with Crystaldecisions.crystalreports.engine.dlllink

User Opinions about the Crystaldecisions.crystalreports.engine.dll Filelink

The statistical graph below was made with the votes received from our users, and it represents their opinions. Through this graph, you can get an idea of how much the Crystaldecisions.crystalreports.engine.dll file works. If you also want to give your opinion about this file, you can use our tool on the very top of this page (the yellow-colored stars).

The Location on our Site of the Crystaldecisions.crystalreports.engine.dll Filelink

• Windows 10
• Windows 8.1
• Windows 8
• Windows 7
• Windows Vista
• Windows XP

When you start Crystal Reports 10, generally you want to do one of three things: create a report, modify a report, or run a report against the data in your database. Reports take data from a database, process it, format it, and then output it to a printer, computer screen, or Web site.

Crystal Report Versions

Crystal Reports comes with a sample database you can use for practice. It’s a Microsoft Access database for a fictitious company named Xtreme Mountain Bikes Inc.

The xtreme.mdb database contains a number of database tables that are representative of the tables a real bike manufacturer might maintain. The tables are filled with sample data that you can manipulate and display with Crystal Reports. You can use this sample data as the basis for your first report.

To create a report, you need to know a few things:

• Which tables in the database contain the data you want

• Which data items you want in those tables

• What manipulations of the data must be performed to give you the information you want

• How you want your report to be formatted

• Whether the users of your report retrieve it from a black-and-white printer, a color printer, a local computer screen, or a Web site

For the purposes of this introduction (and for now), imagine you already know all those things.

Starting Crystal Reports 10

You’ve probably chosen Crystal Reports because you have a database that contains information that’s important to you. In all likelihood, the data in that database changes with time, and you want to be able to keep up with its current status. You could retrieve the information you want by making SQL queries, but that would be too much like work. It’s far better to create a report with Crystal Reports, and then run the report whenever you want the latest status of the information of interest. You have to create the report only once, but you can run it many times, getting the latest results with each successive run. You don’t have to learn SQL or any other method of pulling data out of databases. Reports created with Crystal Reports are easy to build, easy to read, and easy to understand. What could be better?

The first step to creating a report is to launch Crystal Reports from the Windows Start menu. When you do, the Crystal Reports main window appears, displaying the dialog box that welcomes you to Crystal Reports.

You are invited to choose from three options. You can create a Crystal Reports document using Report Wizard or by starting with a blank report. Alternatively, you can open a report that already exists, either to change it or to run it.

Although Report Wizard can be a time- and labor-saver, it does constrain the form of the report. So this chapter takes you right to the point and shows you how to create a report your way, starting from a blank report instead of using Report Wizard.

Using the Blank Report Option

To create a report from scratch, starting with the blank report option, follow these steps:

1. Start Crystal Reports.

The Welcome to Crystal Reports dialog box appears.

2. Select the As a Blank Report option, and then click the OK button.

Spss 19 license code. The Database Expert dialog box appears, which shows possible places to find the source of your data.

3. In the Available Data Sources pane, click the plus sign to the left of the Create New Connection folder to expand it.

This is the folder you choose whenever you’re creating a report from scratch. When you have connected to a database, Crystal Reports remembers where it is.

4. Double-click the database type that matches your data source.

Crystal Reports recognizes a variety of different database types. You must select the right one. If you don’t know which type is correct, ask someone familiar with the data source. To follow along with the example, double-click Access/Excel (DAO). The Access/Excel (DAO) dialog box appears, which asks how to connect to your data source.

5. Click the ellipsis (…) button to the right of the Database Name box.

The Access and Excel files on your system appear. This example uses an Access database file named xtreme. This may not be as easy as it sounds — the file was located at D:Program FilesCrystal DecisionsCrystal Reports 10SamplesEnDatabasesxtreme.mdb.

You may have to browse to find this file on your system.

6. Click the Finish button.

Mini vci j2534 firmware update. Database Expert reappears, with the xtreme database connected.

7. Expand the Tables node, and then double-click the table on which you want to base your report.

The tree in the Available Data Sources pane consists of a number of nodes, some of which branch off from others. Every data source has four of these nodes branching off from it: Add Command, Tables, Views, and Stored Procedures.

8. To follow along with the example, expand the Tables node and then double-click Product.

Doing so copies the Product table from the Available Data Sources pane to the Selected Tables pane.

9. Click the OK button to close Database Expert.

A blank report fills the window.

The Design tab (on the left edge) shows five sections of the report:

• Report Header: Appears only at the top of the report and is the first thing that a viewer sees.

• Page Header: Appears below the report header and at the top of all the other pages in the report.

• Details: The actual content of the report.

• Report Footer section: Appears after the last detailed information in the report.

• Page Footer: Appears at the bottom of every page of the report.